Knowledgebase:
Windows 2003 :: Add Additional IP(s)
Posted by , Last modified by on 13 May 2012 04:11 AM
Make sure you are logged in as Administrator

Click on Start, Then Run

Step 01

From the 'run' box, type: ncpa.cpl and click 'ok'

Step 02

This will open the current Network Connections. For this example we are going to use the one selected.

Right click the adapter and select Properties

Step 03

From the Connection Properties windows click on the Internet Protocol and then Properties

 

Step 04


This will open the Properties for TCP/IP.

Click on the Advanced button.

Step 05

From the Advanced TCP/IP Settings. Click on the Add button in the first window Pane.

Step 06 

Here you would add the additional IP address. Make sure you have the proper Subnet Mask set.

This step would be repeated adding the additional ip addresses accordingly..

Step 07

The example below is of the finished output..

 

 

Step 08

If you run into any problems you can always EMail support.

 

(0 vote(s))
Helpful
Not helpful

Comments (0)
Post a new comment
 
 
Full Name:
Email:
Comments: